J-Link ARM Pro; Universal USB / Ethernet emulator with EMB trace for ARM and Cortex

The new  Universal J-Link ARM Pro is a refined version of the regular J-Link. It has an Ethernet interface in addition to the USB interface, as well as two additional LEDs which are used as hardware status indicators.

J-Link ARM Pro is fully compatible with J-Link ARM, offers ethernet and USB interface and can be used "out-of-the-box". J-Link ARM Pro uses DHCP per default. The built-in webserver makes manual configuration easy and convenient. Ethernet allows using the emulator far away from the PC in a development or production environment; download and debugging speed is higher and Ethernet provides electrical isolation from the PC.
RDI, GDB abd IAR debugger formats.

All features of the regular J-Link ARM also apply to this product.

Features :

    * Fully compatible to J-Link ARM
    * Ethernet interface
    * USB 2.0 interface
    * Any ARM 7/9/11, Cortex-M3 core supported, including thumb mode
    * Additional LEDs for power and RESET indication
    * Comes with web interface for easy TCP/IP configuration (built-in webserver)
    * Serial Wire Debug (SWD) supported
    * Serial Wire Viewer (SWV) supported
    * Automatic core recognition
    * Maximum JTAG speed 12 MHz
    * Download speed up to 720 Kbytes/second
    * DCC speed up to 800 Kbytes/second (Measured with J-Link ARM Pro Rev. 1, ARM7 @ 50 MHz, 12MHz JTAG speed.)
    * Seamless integration into the IAR Embedded Workbench IDE
    * Powered through USB or power supply which comes with J-Link ARM Pro
    * Support for adaptive clocking
    * All JTAG signals can be monitored, target voltage can be measured
    * Support for multiple devices
    * Fully plug and play compatible
    * Standard 20-pin JTAG connector
    * Wide target voltage range: 1.2V - 3.3V, 5V tolerant
    * USB and 20-pin ribbon cable included
    * Memory viewer (J-Mem) included
    * Comes with licenses for: J-Link ARM RDI, J-Link ARM FlashBP, J-Link ARM FlashDL, J-Link ARM GDB Server, J-Flash ARM
    * Software Developer Kit (SDK) available
    * Embedded Trace Buffer (ETB) support
    * Adapter for 5V JTAG targets available
    * 14-pin JTAG adapter available
    * Galvanic isolation from host system via Ethernet
    * Optical isolation adapter available
    * Target power supply: J-Link can supply up to 300 mA to target with overload protection.
    * Coming soon: firmware extensions (ARM11, X-Scale, Cortex R4 / A8 / A9), built-in GDB Server

29-09-2009