Flasher Portable Plus

Portable Flash Programmer for on-chip and external flash memory.

Flasher Portable Plus is a programming tool for microcontrollers with on-chip and/or external flash memory. It has been designed to fill the need of an extremely portable, production grade flash programmer used

for in-field firmware updates. No need to be tethered to an outlet, it is powered by standard batteries.

Initial setup/preparation for stand-alone mode operation is done via the J-Flash software, also used by other Flasher models, which requires a PC running Microsoft Windows 2000, Windows XP, Windows 2003, Windows Vista, Windows 7, Windows 8 or Windows 10.

Flasher portable also supports having multiple configurations/image files stored on the Flasher, so one unit can be used for different targets. Proper image selection is done by simply clicking a button. The currently selected image is indicated via LEDs.

Adapters for all common connections are available which may be used to do everything from fully electrically isolating the Flasher Portable from the target device, to remapping the pins and reducing the pitch and/or pins to the target header.

Features

Stand-alone in-circuit-programmer (Once set up, Flasher can be controlled without the use of a PC program)
Powered by internal battery rechargeable Li-Ion 680mAh, no external power supply required
Full insights with the new 1,8 inch display
Up to 10 hours programming with one battery charge
Supports having up to eight configurations/data files being stored on Flasher
Push button allows easy selection between multiple images/configurations stored on Flasher
128 MB internal memory for configuration and data file storage
Supports ARM, Cortex, PowerPC and Renesas RX cores.
Supports internal and external flash devices
Free updates
Data files can be updated via mass storage or via J-Flash
Target interface: JTAG / SWD / FINE / SPD
Programming speed typically between 30 KB/second and 1 MByte/second. Max. programming speed highly depends on target hardware and max. programming speed of the flash itself
SECURITY: Flasher Portable and Flasher Portable PLUS support Authorized Flashing. It allows to limit the number of flash programming cycles and to protect the Flasher against non-authorized access in case of external production

Supported Cores :

ARM7 / 9 / 11
Cortex-M0, -M0+, -M1, -M3, -M4, -M7, -M23, -M33
Cortex-R4, -R5 (*2)
Cortex-A5, -A7, -A8, -A9, -A12, -A15, -A17 (*2)
AVR Mega (*1)
e200z0 (PowerPC)
MSP430 (*1)
PIC16 (*1)

Renesas RX-610, -621, -62G, -62N, -62T
Renesas RX- 630, -631, -63N, -63T (*2)
Renesas RL78 (*1)
STM8 (*1)

Note:
*1) Supported via Universal Flash Loader.
*2) No Flasher stand-alone support yet. Currently, flash programming is available via PC based J-Flash software only.

Supported Devices : >>

*As a legitimate owner of a SEGGER Flasher, you can always download the latest software free of charge. Though not planned and not likely, Segger reserve the right to change this policy. Note that older models may not be supported by newer versions of the software. Typically, Segger support older models with new software at least 3 years after end of life.

**Actual programming speed depends on flash & target hardware.

For more information regarding the Segger Flasher Portable please contact Gerard Fianen