|
|
J-Link & J-Trace family overview
The SEGGER family of J-Link & J-Trace probes is constantly evaluating with new models and additional features.
The tables blow show the various hardware features, included Software options and MCU families that are supported by the various models.
Hardware features
Software features
Supported MCU models / Cores
Hardware Features
Hardware features l ... |
| |
 |
|
J-Link
JTAG/SWD Emulator with USB interface
J-Link is a USB powered JTAG emulator supporting a large number of CPU cores.
Based on a 32-bit RISC CPU, it can communicate at high speed with the supported target CPUs. J-Link is used around the world in tens of thousand places for development and production (flash programming) purposes.
J-Link is supported by all major IDEs such as IAR ... |
| |
 |
|
J-Link PRO
J-Link PRO is a refined version of the regular J-Link.
It has an Ethernet interface in addition to the USB interface, as well as two additional LEDs which are used as hardware status indicators. It connects via Ethernet or USB to the Windows (Windows 2000 and later) PC host.
J-Link PRO is fully compatible with J-Link and can be used "out-of-the-box". J-Link PRO uses DHCP per default. ... |
| |
 |
|
J-Link PLUS
JTAG/SWD Emulator with USB interface.
J-Link PLUS is a USB powered JTAG emulator supporting a large number of CPU cores.
Based on a 32-bit RISC CPU, it can communicate at high speed with the supported target CPUs. J-Link is used around the world in tens of thousand places for development and production (flash programming) purposes. J-Link is supported by all major IDEs such as IAR ... |
| |
 |
|
J-Link ULTRA+
Emulator for ARM7/9, Cortex and Renesas RX cores
J-Link ULTRA+ is a JTAG/SWD emulator designed for ARM/Cortex and other supported CPUs. It is fully compatible to the standard J-Link and works with the same PC software. Based on the highly optimized and proven J-Link, it offers even higher speed as well as target power measurement capabilities due to the faster CPU, built-in FPGA an ... |
| |
