J-Link PRO

J-Link PRO is a refined version of the regular J-Link.

It has an Ethernet interface in addition to the USB interface, as well as two additional LEDs which are used as hardware status indicators. It connects via Ethernet or USB to the Windows (Windows 2000 and later) PC host.

J-Link PRO is fully compatible with J-Link and can be used "out-of-the-box". J-Link PRO uses DHCP per default. The built-in webserver makes manual configuration easy and convenient. Ethernet allows using the emulator far away from the PC in a development or production environment; download and debugging speed is higher and Ethernet provides electrical isolation from the PC.

All features of the regular J-Link also apply to this product.

Features

Fully compatible to J-Link
Ethernet interface
USB 2.0 interface
Supported CPUs: Any ARM7/9/11, Cortex-A5/A8/A9, Cortex-M0/M1/M3/M4, Cortex-R4 and Renesas RX610/RX621/RX62N/RX62T/RX630/RX631/RX63N
Free software updates1, 3 years of support
Additional LEDs for power and RESET indication
Comes with web interface for easy TCP/IP configuration (built-in webserver)
Serial Wire Debug (SWD) supported
Serial Wire Viewer (SWV) supported
Automatic core recognition
Maximum JTAG speed 12 MHz
Download speed up to 3 MByte/second
Seamless integration into the IAR Embedded Workbench IDE
Powered through USB or power supply which comes with J-Link PRO
Support for adaptive clocking
All JTAG signals can be monitored, target voltage can be measured
Support for multiple devices
Fully plug and play compatible
Standard 20-pin JTAG connector
Wide target voltage range: 1.2V - 3.3V, 5V tolerant
USB and 20-pin ribbon cable included
Memory viewer (J-Mem) included
Comes with licenses for: J-Link RDI, J-Link Unlimited Flash Breakpoints, J-Link GDB Server, J-Flash
Software Developer Kit (SDK) available
Embedded Trace Buffer (ETB) support
14-pin JTAG adapter available
Galvanic isolation from host system via Ethernet
Optical isolation adapter available
Target power supply: J-Link can supply up to 300 mA to target with overload protection.

Package content

J-Link PRO is delivered with the following components:

J-Link PRO with standard 20-pin 0.1" male connector (compatible to J-Link)
20-pin, 0.1" target ribbon cable
Ethernet cable (1 m)
USB cable

Licensing

J-Link PRO comes with licenses for all J-Link related SEGGER software products: J-Link Unlimited Flash Breakpoints, J-Link RDI, J-Flash, J-Link GDB Server, providing the optimum debugging solution for professional developers. J-Link PRO can be used with almost all ARM debuggers, enabling download to flash memory with an unlimited number of breakpoints when debugging programs located in flash memory of most popular ARM microcontrollers. It also comes with the license to use J-Flash, SEGGER´s popular flash programming software.

Why PRO?

There are many aspects which make the J-Link PRO very attractive to use:

Price: Buying a J-Link PRO, which comes with licenses for all J-Link-related SEGGER software, will save you a lot of money because buying a J-Link and all licenses separate is more expensive.

Speed: J-Link PRO via TCP/IP provides higher download speed than J-Link via USB.

Usability: J-Link PRO can be used "out-of-the-box". A built-in J-Link GDB Server is planned to be implemented in the near future.

Flexibility: Due to the Ethernet interface, long distances between the development PC and the target system are possible. You can set a default gateway for J-Link PRO, so it is also possible to use it in large intranets.

Security: When using J-Link PRO via Ethernet, galvanic isolation of the development PC and the target system is supported.

Ready future use: J-Link PRO provides more memory for future firmware extensions (e.g. ARM11, X-Scale, Cortex R4 and Cortex A8).

How to buy :

For any enquiries regarding the SEGGER J-link PRO, please contact Gerard Fianen at Indes - IDS B.V.