Voyager USB 3.0, 2.0 and 1.1 system
The Voyager M3 is LeCroy’s 6th generation USB protocol verification system designed for the next evolution of universal serial bus known as SuperSpeed USB. Leveraging LeCroy’s extensive expertise in high-speed serial data analysis, the Voyager provides 100% accurate protocol capture of both USB 2.0 and 3.0 at data rates up to 5 Gb/s.
This multifunction validation platform is available with an integrated exerciser capable of both 2.0 and 3.0 host and device emulation. In addition to error injection and compliance verification, the exerciser provides early adopters with a USB 3.0 link to begin bring-up testing well before commercial hosts are available. Loaded with innovative features that anticipate the needs of early adopters, the Voyager platform is the intelligent choice for “cradle-to-grave” USB 3.0 validation.
Unmatched Accuracy
The Voyager analyzer front-end leverages custom circuitry from LeCroy’s 5Gb/s PCI Express analyzer to provide fast-locking and uncompromised accuracy for USB 3.0 recording. SuperSpeed USB will implement hardware based power management with devices frequently entering power suspend mode. While in-line, the Voyager system will detect and seamlessly recover from electrical idle while accurately showing all bus and power state transitions time-stamped within the display. It includes full support for spread spectrum clocking (SSC) and data scrambling (LFSR) which can be enabled / disabled for silicon bring-up testing.
Flexible hardware
The front end of the Voyager analyzer features native 3.0 connectors that bifurcate USB 2.0 and 3.0 electrical signals to provide loss-less capture of traffic from both links simultaneously. Concurrent high-speed and SuperSpeed recording allows end-to-end viewing of data transfers across a USB 3.0 hub. The system can operate as a USB 2.0/3.0 analyzer; and is also available in a 2.0-only configuration that is upgradeable to 3.0.
The Voyager M3 platform includes 4GB of recording memory plus USB and Gbe links for uploading recorded traffic to the host PC. Fast access to captured traffic is now possible thanks to sustained data transfers of 600Mbit per second over the Gbe link. Both the analyzer and exerciser can utilize slow clocking (fractional) or external clock sources (as low as 1Mhz) for testing with FPGA-based prototypes or emulators that require ultra low-speed data acquisition.
The heart of the Voyager verification system is LeCroy’s revolutionary BusEngine™ technology. This state-of-the-art protocol processing core incorporates a real-time recording engine and configurable tools to selectively monitor and record SuperSpeed USB traffic. Field upgradeable firmware allows the BusEngine to evolve and support new features or future changes to the USB specification.
Additional innovations include upgradeable hardware components. The USB connectors on the analyzer are mounted on a removable daughter-card allowing the system to be upgraded as improved connectors are available. The analyzer and exerciser also include SMA differential Input/Output lines as an alternate interface for taping between early development boards. This eliminates dependencies on USB 3.0 connectors allowing testing to begin as soon as PHY silicon is available.
6th Generation Analysis Software
The Voyager utilizes the legendary CATC Trace which has become the industrys de facto standard for USB 2.0 protocol analysis. The trace viewer software uses colors and patterns to train the eye to understand information faster. When recording mixed traffic upstream from a SuperSpeed hub, Legacy 2.0 and 3.0 packets are labeled and interleaved in a single display. Each event is shown on a separate row with every field labeled and color coded.. Traffic from the logical 2.0 & 3.0 channels can be individually filtered, searched or exported from the trace. The USB Transfer level can be expanded and collapsed to show the packet layer including all link management packets (LMPs) and flow control symbols.
LFPS signaling is shown in the trace allowing users to verify link recovery timing
Raw Debugging Power
The Voyager includes a special Link Tracker mode that captures every transition and presents raw 10-bit data patterns chronologically with timing resolution of 2ns. Designed to assist with low-level debugging, all ordered sets including training sequences and inter-packet symbols can be displayed in raw 10-bit, 8-bit, scrambled, and unscrambled Hex format. Symbol-to-symbol timing measurements are possible with a single click.
The Link Tracker display shows dual-simplex data streams in raw 10-bit or hex format.
Key Features
* CATC Trace Analysis Software System – Expand / Collapse transfer layer for faster interpretation of USB traffic
* Capture / Analyze 3.0 & 2.0 traffic concurrently – Record 2.0 and SuperSpeed data path to test & debug USB 3.0 host & hub operation
* Integrated 3.0 analyzer / exerciser (single box) – Multifunction system with 3.0 and 2.0 device or host traffic generation
* 4GB Recording Capacity - Capture long recording sessions for analysis and problem solving
* Raw bit Recording / 10-bit error detection – view and correlate low-level 10-bit symbols to higher-level packet structures
* Detects over 40 Link & Protocol errors – Critical link and timing errors are automatically detected and flagged in the trace
* 2ns timing resolution - extremely accurate timing resolution allows precise measurement of link layer handshaking
* External Trigger In / Out – Use the Voyager to identify any packet and toggle a scope or logic analyzer (via SMA connectors)
* Fully supports SSC and Data scrambling - Fast Locking and Accurate capture on 5Gbps signals
* Hardware Triggering – Trigger on both 2.0 or 3.0 protocol events to isolate important traffic, specific errors or data patterns
* Comprehensive Device Decoding - SCSI Mass Storage, 3.0 Hub, PTP/Still Image, Printer, PictBridge, Media Transfer Protocol (MTP), and all popular USB device classes
* Hardware Filtering - Automatically exclude non-essential and redundant symbols including Idles, TS1, TS2, SKPs, and LFPS sequences.
* Intelligent Reporting - Automatically report event metrics and flag over 20 common USB 3.0 protocol errors
* Sophisticated Viewing - View TLP messages and headers, plus logical transaction and transfer layers of the USB protocol
* Gbe or Hi-Speed USB upload – Sustained transfer rates of 600Mbps over Gbe or 400 mbps over USB 2.0 provide instant access to captured data
* SMA-input differential probing - alternate connector interface allows taping between early development boards if native connectors are unavailable
* Slow clock / External clock Input – Adjustable signal frequencies for synchronizing analyzer timing with prototype & validation boards
* 3 Year Hardware Warranty - Protect your investment with industry leading support and warranty
Intelligent Triggering
The Voyager provides hardware triggering to pinpoint protocol events of interest. Trigger events can be specified at the lowest levels including bus states and ordered sets (Link up, SKP, etc…) or header fields including route strings or packet types (ACK, EPRDY, etc….). Voyager’s graphical drag-and-drop interface makes setup easy. Users can define trigger logic that monitors multiple sequential events with counters and timers incorporated within each state. Real time error triggering is also available to detect 20 common error conditions.
Construct multi-level sequential trigger & filter recording rules
Real Time Filtering
SuperSpeed data transfers at 5 Gb/s can fill memory buffers in an instant making event filtering critical for efficient debug. The Voyager analyzer can filter unwanted traffic from the buffer in real-time by discarding redundant patterns such as SKPs, idles, and training sequences. Filtering logic can also include transaction layer packets with added criteria like direction or port number.
Error Detection
The Voyager can detect and flag over 40 Link & Protocol errors including logical link and timing errors. At the lower layers, training sequences and link commands are automatically verified for proper formatting. The Spec View displays header fields in hex or binary and also marks errors in red.
Spec-View shows header packets in hex or binary
USB Device Decoding
The Voyager software performs full decoding of USB device class traffic. It also supports vendor specific decoding for developers interested in automatically showing proprietary commands in the trace view. The Voyager offers full support for the USB OTG specification. The analyzer identifies both the HNP(Host Negotiation Protocol) and SRP (Session Request Protocol) occurrences. VBus and Data Line pulses are captured, displayed and integrated in the trace file to provide a complete, end-to-end look at OTG occurrences on the bus. Complete List of Device Class decodes
Intelligent display shows each layer of the USB protocol plus device class decodes such as Mass Storage
Find The Issues Fast
The Voyager software provides many mechanisms to measure and report on USB 2.0 and 3.0 traffic. With the Traffic Summary display, users can evaluate statistical reports at a glance or navigate to individual events. Users may select transaction packets to view ACK/NAK or Device Notification events, then jump to each occurrence with a single keystroke. Reports are available showing link throughput and flow control metrics. Higher level events are also tracked and reported at the logical USB Transfer level. The error report shows a range of protocol violations - from invalid CRCs to power state transition errors.
Traffic summaries provide detailed metrics for USB 2.0 and 3.0 events within a trace
The Bus Utilization graphs show data and packet length, bus usage by device in a histogram format. The Bandwidth calculator automatically calculates the time delta between two points in the trace. Fast Search and Find options allow users to navigate to specific packets, errors and any data type within a trace file. The CATC Trace supports filter and hide commands, to temporarily remove irrelevant data from the display for more efficient viewing.
Since 1996, LeCroy has been a key provider of tools for the USB ecosystem. The Voyager system leverages countless hours of research in high-speed serial data analysis to create the most reliable and accurate USB 3.0 analyzer system available. Combined with the exerciser option and the CATC Trace expert software, the Voyager platform alleviates developers from tedious byte-level analysis and lets them focus on quick resolution of protocol layer problems.
Specifications
Product Model LeCroy Voyager USB 3.0 Pro Analyzer System
Basic Functions:
Protocol(s) Supported USB 1.0, 1.1, 2.0 & 3.0
Protocol Analyzer Yes
Protocol Exerciser Yes
Host HW Requirements Pentium II or greater,
USB 2.0 port
OS Requirements Windows XP and Vista
Memory Size 4048MB
Data Rates Supported 1.2 - 4800 Mb/s
Recording Channels 1
Data Bus Interface Half duplex differential (USB 2.0)
Dual simplex differential (USB 3.0)
Form Factor Enclosed Chassis
Front Panel Connectors Analyzer – one (1) USB 2.0 & 3.0 recording channel with USB 3.0 A & B connectors
Exerciser– one (1) USB 2.0 & 3.0 Generator channel with USB 3.0 A & B connectors
Front Panel Indicators Platform LEDs : Power, Status
Analyzer LEDs : Rec 2.0, 3.0,
Exerciser LEDs : Gen, Rec 2.0, 3.0
Dimensions: Voyager M3: 12.5 x 11 x 2
External Clock Input MMCX to SMA
External Clock Frequencies 1 MHz to 5 GHz
Weight 5.4 lbs
Power Requirements 90-254 VAC, 47-63 Hz (universal input), 100W maximum
Alternate Taping Interface MMCX to SMA differential input / output (record and transmit)
External Trigger IN/OUT SMA connectors
Options :
* Voyager M3 Slow Clock Option
* Voyager M3 SMA Differential Input Option
* Voyager M3 Exerciser Option
Features :
CATC Trace Yes
Field Upgradeable BusEngine Yes
SuperSpeed USB 3.0 capture Yes
Low/Full/High Speed USB 2.0 capture Yes
Integrated Exerciser option Yes
Gbe Upload Yes
Spec View (3.0 packets) Yes
Single state triggering Yes
Sequential state triggering Yes
Pre-capture filtering Yes
Automation API Yes
On-the-Go (OTG) Yes
Raw 10-bit Display Yes
Link Tracker Yes
Slow Clock Option Yes
External Clock Option Yes
SMA Differential Input Option Yes
Environmental
Operating Temperature 32 to 131 F
Non-operating -20 to 80° C (-4 to 176° F)
Operating Humidity 10% to 90% RH (non-condensing)
|
