Tel. +31­ 345 545535
 
Embedded
Products
 
Solutions
Coming soon...
 
Partners
Who we work with
 
News
What's going on
 
Media
Something to read
 
About
Who we are
 
Contact
Where we are
You are on the following page: Products > > > Industrial IOT Controller Nederlands | French
 
 

Industrial IOT Controller

sysWORXX CTR-700

Massive IoT Controller for Predictive Maintenance & Condition Monitoring

Afbeeldingsresultaat voor sysWORXX CTR-700

Predictive Maintenance & Condition Monitoring
In future industrial communication will depend on functionalities such as condition monitoring and predictive maintenance. It ensures process optimization through data acquisition and afterwards cost optimization through process optimization.

The new control system of SYS TEC electronic is developed among others for these applications. In addition to numerous interfaces, such as industrial inputs and outputs, TCP / IP, MQTT, Modbus, CANopen, USB and μSD, the controller contains two Ethernet interfaces. This ensures the separation of Enterprise IT and Shop Floor OT.

Application Scenarios

  • Collection, consolidation and analysis of data points from system to be monitored
  • Condition Monitoring (permanent status monitoring)
  • Energy Management (Smart Building, Smart Industry)
  • Predictive Maintenance
  • Integration into Mesh net
  • Narrowband functionality (from 2018)

CTR-700 speaks the language of your employees
The special feature of the sysWORXX CTR-700 is the software. It can be programmed via IEC 61131-3 as well as in various IoT languages ​​(C#/.Net, Node-RED, Java, Python). Thus it is not necessary to require an expensive external service. The controller speaks the language of the employees.

Programming Languages
IoT Languages

  •  C#/.Net
  •  Node-RED
  •  Java
  •  Python

Further Languages/Interfaces/Protocols

  • MQTT
  • OPC UA
  • OpenPCS
  • C/C++
  • SD
  • CANopen
  • Modbus
  • TCP/IP

Particularities

  • Support of modern high-level languages
  • Simultaneous execution of IEC 61131-3 PLC programs and other Linux applications
  • Two independent EthernetInterfaces allow strict and secure separation of Enterprise IT and Shop floor OT
  • Use of higherlayer protocols as CANopen (incl. CANopen-Manager-Service an easy integration of other CANopen modules)
  • Support of communication and data exchange with other devices via Modbus protocols by extended Modbus/TCP function blocks​​
  • Backplane expansion bus, shielded between the module underside and the DIN rail
  • Suitable for DIN rail mounting

Mesh nets with Wirepas
Via the backplane expansion bus, the CTR-700 can be easily integrated into mesh networks using our extension module (official launch: Q2 / 2018). We use our partner software for this solution - Wirepas Connectivity.

Wirepas Connectivity Software provides a connectivity solution optimized for performance, bandwidth, range and latency. The technology is hardware-independent - the protocol runs on every wireless chip. The Mesh net solution allows customers to run the network on batteries for up to 15 years. With this MeshNet solution, they are able to flexibly optimize the connection solution for the application in terms of performance, bandwidth, range and latency.

 

 

sysWORXX CTR-100

Measure, track, control in proximity to sensor/actuator

Afbeeldingsresultaat voor sysWORXX CTR-100

Small & Fine: Industry 4.0-control with connection to the cloud for installation proximity to sensor/actuator

Our sysWORXX CTR-100 is a plug-in System on Module for cloud connection which is freely programmable by users. Unlike other IoT Chip devices, the SYS TEC electronic CTR-100 combines sensor2cloud
requirements with data preprocessing features ranging from time-critical signals to efficient control tasks. To that end, the CTR-100 comes with appropriate function libraries pre-installed, making
it ready for use straight away. Moreover our CTR-100 is prepared for the Cloud Services, such as IBM IoT Platform.

Functions

The baseboard has an Arduino Shield slot to use all standard Arduino components
The sysWORXX CTR-100 is easy to integrate for use in Internet of Things/Industry 4.0 applications and the connecting devices/machines to the cloud as these fields require. Like every of our devices the CTR-100 is prepared for the direct connection to Cloud.

The benefits of the SYS TEC electronic CTR-100 lie in its use, security and cloud connection. On the chip are libraries and protocols such as MQTT, Modbus or CANopen which are ready to use immediately.

The templates supplied in the source code are available to users as a starting point for their own customisation. I²C and SPI make it possible to directly connect actuators and sensors.

This allows the entire measurement, control and regulation to be handled on the CTR-100. As a result, the chip works independently of the cloud. There is no additional gateway required for cloud connection.

Our sysWORXX CTR-100 delivers M2M communication at the highest level, as well as being efficient and available at a moderate cost.

   

 
 

INDES-IDS BV offers solutions for Embedded Software Development as well as for the Telecommunication NEMS and Service Providers. In these markets we offer products of either the market leader or the innovation leaders. Our goal is to assist you to get to the market sooner by offering a combination of products, knowledge and services.