J-Link ARM Pro; Universal USB / Ethernet emulator with EMB trace

The J-Link ARM Pro is a refined version of the regular J-Link supporting ARM and Cortex. It has an Ethernet interface in addition to the USB interface, as well as two additional LEDs which are used as hardware status indicators.

It connects via Ethernet or USB to the Windows (2000/XP/Vista) PC host.

J-Link ARM Pro is fully compatible with J-Link ARM, offers ethernet and USB interface and can be used "out-of-the-box". J-Link ARM Pro uses DHCP per default. The built-in webserver makes manual configuration easy and convenient. Ethernet allows using the emulator far away from the PC in a development or production environment; download and debugging speed is higher and Ethernet provides electrical isolation from the PC.

All features of the regular J-Link ARM also apply to this product.

Features :

    * Fully compatible to J-Link ARM
    * Ethernet interface
    * USB 2.0 interface
    * Any ARM 7/9/11, Cortex-M3 core supported, including thumb mode
    * Additional LEDs for power and RESET indication
    * Comes with web interface for easy TCP/IP configuration (built-in webserver)
    * Serial Wire Debug (SWD) supported
    * Serial Wire Viewer (SWV) supported
    * Automatic core recognition
    * Maximum JTAG speed 12 MHz
    * Download speed up to 720 Kbytes/second
    * DCC speed up to 800 Kbytes/second (Measured with J-Link ARM Pro Rev. 1, ARM7 @ 50 MHz, 12MHz JTAG speed.)
    * Seamless integration into the IAR Embedded Workbench IDE
    * Powered through USB or power supply which comes with J-Link ARM Pro
    * Support for adaptive clocking
    * All JTAG signals can be monitored, target voltage can be measured
    * Support for multiple devices
    * Fully plug and play compatible
    * Standard 20-pin JTAG connector
    * Wide target voltage range: 1.2V - 3.3V, 5V tolerant
    * USB and 20-pin ribbon cable included
    * Memory viewer (J-Mem) included
    * Comes with licenses for: J-Link ARM RDI, J-Link ARM FlashBP, J-Link ARM FlashDL, J-Link ARM GDB Server, J-Flash ARM
    * Software Developer Kit (SDK) available
    * Embedded Trace Buffer (ETB) support
    * Adapter for 5V JTAG targets available
    * 14-pin JTAG adapter available
    * Galvanic isolation from host system via Ethernet
    * Optical isolation adapter available
    * Target power supply: J-Link can supply up to 300 mA to target with overload protection.
    * Coming soon: firmware extensions (ARM11, X-Scale, Cortex R4 / A8 / A9), built-in GDB Server

Optional modules :

J-Mem                    - displays memory contents of ARM-systems and allows modifications of RAM and SFR's while target is running (Free)

J-Flash                    - Flash programmer (Included)
Flash Utilities           - Utilities for Flash Programming (Free with several evaluation boards)
Flash Breakpoints     - Enables setting breakpoints in FLASH memeory to extend on limited H/W breakpoints (Included)
Flash Loader            - flash loaders which allow to download your application directly into the flash

RDI support             - RDI interface to use J-Link with any RDI compliant debugger. (Included)
GDB Server              - remote server for GDB debuggers (Free)

JTAG Isolator            - Galvanic isolation of your target from development host

J-Link ARM selection chart here>>

How to buy :

Please contact Glenn Moloney to discuss your configuration and get a quotation today.